Core Count: 3P, 4P, 5P
Category: Male end
Installation Method: Welding wire type
Applications: Power, Signal
Panel-mounted wire-welding type: Error prevention and locking design: Through the exclusive B-code mechanical structure and other codes such as A and D forming physical exclusivity, it completely avoids equipment damage caused by incorrect insertion; It adopts threaded locking method.
Protection and adaptation design: Combined with silicone sealing rings to achieve IP67 protection, capable of coping with harsh conditions such as dampness and dust in the workshop; Adapting to the installation requirements of compact spaces of equipment, the panel-mounted installation form supports front locking and rear locking styles, and is suitable for different PCB board installation layouts. The 3 - 5 pin specification of M12 B-code is tailor-made for industrial low-speed bus signal transmission, with different pin numbers having clear divisions of labor, and meeting differentiated needs. Widely used in automated production lines, distributed instruments, mobile devices, and conventional industrial sensing equipment in industries such as automotive manufacturing, chemical industry, and logistics, to achieve stable transmission of signals and power.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
||
|
A/C
|
D/C
|
AWG
|
mm²
|
|||
| MC12BM-03R2LSLNS301 |
3
|
4A
|
250V
|
250V
|
22
|
0.34
|
| MC12BM-04R2LSLNS301 |
4
|
4A
|
250V
|
250V
|
22
|
0.34
|
| MC12BM-05R2LSLNS301 |
5
|
4A
|
60V
|
60V
|
22
|
0.34
|
| Core | 2A | 3A | 4A | 5A |
| male end |
|
|
|
 |
| 6A | 8A | 12A | 17A | |
|
|
|
|
|
|
| 4B | 5B | 3C | 4C | |
|
|
|
|
|
|
| 5C | 6C | 4D | ||
|
|
|
|
||
| Core | 2A | 3A | 4A | 5A |
| female connector |
|
|
|
|
| 6A | 8A | 12A | 17A | |
|
|
|
|
|
|
| 4B | 5B | 3C | 4C | |
|
|
|
|
|
|
| 5C | 6C | 4D | ||
|
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
M12 A Coded Connection Cable Straight Overmolded Type 2-17PIN Female Solder Type
M16 Circular Connector Rear-Panel Mount 2–24 PIN Male Soldered Type
M12 A Coded Connectors Board Front Mount 2-17PIN Female Solder Type M12*1.0
M12 A Coded Connectors Board Front Mount 2-17PIN Male Solder Type M12*1
telephone
Contact US