Available Pin Counts: 2P, 3P, 4P, 5P, 6P, 7P, 8P
Type: Male
Mounting Method: Assembled Type
Direction: 180°
Applications: Power, Signal Transmission
Snap-on plastic housing model:
M9 circular connector male end snap-on plastic housing 2-8P soldered wire type is a micro industrial connector designed for space-constrained scenarios. It features fast snap-on connection, lightweight plastic, and stable soldering wire as its core advantages. It is suitable for 2-8-core signal / power transmission, balancing convenient assembly and basic protection, and is suitable for non-strongly shielded automation and instrumentation scenarios. Core advantages: Fast connection: Snap lock, no tools required, insertion and removal is 3-5 times faster than threaded type, suitable for frequent insertion and removal scenarios. Lightweight and cost-effective: The plastic housing is 30%-50% lighter than metal housing, lower cost, and suitable for non-strong mechanical impact / non-strong EMI environments. Flexible installation: Bent foot design is suitable for wiring in narrow spaces, soldered wire type is suitable for long-term stable connection requirements of fixed equipment. Strong compatibility: 2-8P available, compatible with mainstream sensors and actuators' signal / power transmission needs.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
| MC09NM-02U1LSLNS001 |
2
|
4A
|
125V
|
125V
|
24
|
0.25
|
|
| MC09NM-03U1LSLNS001 |
3
|
4A
|
125V
|
125V
|
24
|
0.25
|
|
| MC09NM-04U1LSLNS001 |
4
|
3A
|
125V
|
125V
|
24
|
0.25
|
|
| MC09NM-05U1LSLNS001 |
5
|
3A
|
125V
|
125V
|
24
|
0.25
|
|
| MC09NM-06U1LSLNS001 |
6
|
1A
|
125V
|
125V
|
26
|
0.14
|
|
| MC09NM-07U1LSLNS001 |
7
|
1A
|
125V
|
125V
|
26
|
0.14
|
|
| MC09NM-08U1LSLNS001 |
8
|
1A
|
125V
|
125V
|
26
|
0.14
|
|
| Core | 2 | 3 | 4 | 5 |
| male end |
|
|
|
|
| 6 | 7 | 8 | ||
|
|
|
|
||
| Core | 2 | 3 | 4 | 5 |
| female connector |
|
|
|
|
| 6 | 7 | 8 | ||
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US