Available Pin Count: 4P
Type: Female
Mounting Method: Solder Type
Applications: Power, Signal
Front Panel Mount, Solder Type:Mounting and Wiring:For front panel mounting, the connector flange is placed on the front of the panel and locked in place from the panel front with M8 threads and matching nuts. No disassembly of internal equipment components is required during installation, and subsequent maintenance or replacement of the connector is more convenient. It is suitable for the front-side operation requirements of conventional equipment panels, and the panel opening size is generally compatible with the M8 interface standard.
Environmental and Mechanical Performance:When fully tightened, it achieves an IP67 protection rating, providing dustproof and short-term water immersion protection. It is suitable for harsh industrial environments such as dusty and humid conditions, meeting the usage requirements of Pollution Degree 3.
Wide Applications:It is widely used in devices such as sensors, small actuators and compact control cabinets in industrial automation production lines. For example, it can stably transmit detection signals in the connection between position sensors and control modules on assembly lines.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08DF-04F2LSLNS1301
|
4
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| Male |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| Female |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US