Available Pin Count: 5P
Type: Female
Mounting Method: Solder Type
Applications: Power, Signal
Front Panel Mount, Solder Type:Mounting and Fixation Method:Adopting a front panel mounting structure, it is fixed on the equipment panel via M12-sized mounting threads. A front-panel locknut is used to enhance stability, which can resist loosening caused by equipment vibration. The panel opening size is adapted to the mounting thread specification, making it suitable for compact space layouts. The female connector interface features an M8×1 thread-locking design for mating with external male connectors.
High Connection Reliability:Solder-type wiring forms a firm mechanical and electrical connection. Combined with gold-plated contacts, it can maintain stable signal transmission under vibration and shock conditions, avoiding the loosening issue that may occur with crimp-type connections.
Suitable for Compact Scenarios:Front panel mounting allows for convenient on-site maintenance without occupying excessive equipment space. The 5-pin design meets the demand for parallel transmission of multiple signals, making it ideal for devices with limited internal space such as control cabinets, sensor modules, and small actuators.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BF-05F2LSLNS1301
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| Male |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| Female |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US