Available Pin Count: 5P
Type: Female
Mounting Method: Plug Plate Type
Applications: Power, Signal
Installation with insert plates:
Fixation and installation structure: The installation screws are mostly of M8 specification. They are fixed through the rear installation method, and are reinforced by the front plate locking screws to ensure stability. The panel opening size is compatible with the corresponding installation screws, which can prevent loosening caused by equipment vibration. Material selection: The contact points are mostly made of copper alloy and have a gold plating on the surface, ensuring conductivity and corrosion resistance; The shell is mainly made of nickel-plated brass, balancing mechanical strength and oxidation resistance; Environmental and mechanical performance: The protection level is mostly IP67, which can effectively prevent dust and water, suitable for dusty and humid industrial environments; Working temperature range is generally -40℃ to 85℃. It is widely used in factory automation and fieldbus modules, industrial robot joint connections, sorting and conveying equipment for warehouse automation, servo motors and frequency converters for motion control drives, and can also be adapted to PCB boards and external cables for signal and power transmission of micro sensors, industrial cameras, etc.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BF-05R2LDLNS1601
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| Male |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| Female |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US