Available Pin Counts: 3P, 4P, 6P, 8P
Type: Male
Termination Type: Wire Solder Type
Orientation: Right-angle 90°
Applications: Power, Signal Transmission
90° Overmolded TypeProcess Features: Adopting an integrated overmolding process, the metal core components and weather-resistant rubber materials are injection-molded in one step via a mold. This process enables the overmolded layer to bond tightly with the internal metal structure, which not only enhances the overall mechanical strength but also effectively protects the internal electrical connection parts.
Space-Saving Design: The 90° bending angle can precisely change the cable routing direction, allowing cables to be arranged in an orderly manner vertically or horizontally. It is suitable for narrow and complex wiring spaces such as control cabinets and equipment interiors, saving both wiring space and time.
Excellent Protection Performance: The overmolding process achieves a good sealing effect, typically with IP67 waterproof and dustproof rating. It can effectively prevent the intrusion of water, dust, oil stains, etc., and reduce the occurrence of faults such as short circuits and poor contact.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MB08AM-035LSRAXXXXX01
|
3
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
|
MB08AM-045LSRAXXXXX01
|
4
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
|
MB08AM-065LSRAXXXXX01
|
6
|
1.5A
|
30V
|
30V
|
26
|
0.14
|
|
|
MB08AM-085LSRAXXXXX01
|
8
|
1.5A
|
30V
|
30V
|
26
|
0.14
|
|
| Core | 3A | 4A | 6A |
| Male |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| Female |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US