Available Pin Counts: 5P
Type: Male
Installation method: Welding wire type
Direction: 180°
Applications: Power, Signal Transmission
Straight-type plastic assembly wire-welding type:
Appearance and structure: It adopts a straight design, with an overall cylindrical shape. The outer shell is made of plastic material, usually having good wear resistance and insulation properties. The connector uses a threaded locking method to ensure the stability of the connection and prevent loosening in vibration or impact environments. The B code is its unique identifier, which can effectively prevent the connector from being mistakenly plugged with other codes. Assembly and wiring method: It uses plastic assembly technology, with a compact internal structure. The wiring method is wire-welding type, where the wires need to be connected to the terminals of the connector through welding. This connection method can provide good electrical performance and mechanical strength.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08BM-05N1LSMNS1401
|
5
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
| Core | 3A | 4A | 6A |
| male end |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| female connector |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US