Available Pin Counts: 3P, 4P, 6P, 8P
Type: Female
Wiring Method: Wire Solder Type
Applications: Power, Signal Transmission
Straight Plastic Assembled Wire Solder Type
Appearance & Structure: It adopts a straight design with a cylindrical overall shape. The housing is made of plastic material, which usually has good wear resistance and insulation performance. The connector uses a threaded locking method to ensure connection stability and prevent loosening under vibration or impact conditions.
Pin Counts & Coding: Multiple pin counts are available, including 3-pin, 4-pin, 6-pin, and 8-pin, to meet different signal transmission requirements. The A-code serves as its unique identifier, which can effectively prevent misconnection with connectors of other coding types.
Assembly & Wiring Method: It adopts a plastic assembly process with a compact internal structure. The wiring method is wire solder type, which requires soldering the wires to the connector terminals. This connection method can provide excellent electrical performance and mechanical strength.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
|||
|
A/C
|
D/C
|
AWG
|
mm²
|
||||
|
MC08AF-03N1LSMNS1401
|
3
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
|
MC08AF-04N1LSMNS1401
|
4
|
3A
|
60V
|
60V
|
24
|
0.25
|
|
|
MC08AF-06N1LSMNS1401
|
6
|
1.5A
|
30V
|
30V
|
26
|
0.14
|
|
|
MC08AF-08N1LSMNS1401
|
8
|
1.5A
|
30V
|
30V
|
26
|
0.14
|
|
| Core | 3A | 4A | 6A |
| Male |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
|
| Core | 3A | 4A | 6A |
| Female |
|
|
|
| 8A | 5B | 4D | |
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
telephone
Contact US