M12 X Coded Connectors Plate Rear Right Angle Socket 8PIN Female Plug plate PCB type M12*1

**M12 X Coded Connectors Plate Rear Right Angle Socket 8PIN Female Plug plate PCB type M12*1**

Serial Code : M12 Series Product Code : MC12XF-08R2LMlNR101 Product Info :

Core Count: 8P

Category: Female

Connection Method: Plug-in type

Application: Power, Signal

Get a Quotation Sample Request

Product video

90-degree Mersat plug-in PCB panel type with shielding front lock (long):
Strong compatibility in terms of space and installation: The 90-degree bend allows the cables to be laid horizontally along the panel, avoiding the space congestion caused by vertical laying, especially suitable for areas with dense internal lines in equipment; the front lock design does not require removing the equipment casing, and the installation and later maintenance efficiency is 40% higher than the rear lock model. The extended size is suitable for deep panel installation or special installation scenarios that require additional reserved protection space. Transmission stability is double guaranteed: The X-encoded high-density interface design is specifically created for industrial 4.0 high-speed data transmission, capable of meeting the gigabit transmission requirements of edge computing, industrial Ethernet, etc.; the 360° fully enclosed shielding structure can form a complete electromagnetic protection barrier, solving the problem of data transmission packet loss in strong interference environments, combined with the PCB plug-in directly welding, reducing the risk of loose connections, and further ensuring signal integrity.

Technical Information

Product type

M12 circular connector X code

Application

Electricity, signals

Sensor type

General

Contact component

Female

Core count

8Pin

Connection method

Plug-in type

Protection level

IP67

Number of insertions and withdrawals

500 plug-in and unplugged cycles

Working temperature

-40℃ / 85℃

Product Specifications

Shell material

Copper plated with nickel

Flame retardant grade

V0 (Compliant with UL94P)

Sealing material

Epoxy resin/rubber

Contact material

Copper plated with gold

Contact component carrier material

PA9T

Electrical parameters

Product model	Core	Rated current	Rated voltage		Wire gauge / Dimension
			A/C	D/C	AWG	mm²
MC12XF-08R2LMlNR101	8	2A	30V	30V	24	0.25

Encoding parameters

Core	2A	3A	4A	5A
male end
	6A	8A	12A	17A

	4B	5B	3C	4C

	5C	6C	4D

Core	2A	3A	4A	5A
female connector
	6A	8A	12A	17A

	4B	5B	3C	4C

	5C	6C	4D

Safety Warning

The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.

The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.

Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.

Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.

When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.

The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".

+86 18925497513