M12 K-Code Connector Rear Panel Mount 3-5 PIN Male PCB Mount Type M16*1

Panel-mounted plug-in type:
Structural design: Usually equipped with threaded interfaces, flanges and locking nuts. During installation, it is inserted from the front side of the panel and fixed by a nut; the terminals are in the form of cylindrical feet or custom bends, which can be directly inserted into the solder pads of the PCB board and welded for fixation. Some are equipped with O-rings to enhance the sealing effect. There are also anti-misinsertion codes to prevent incorrect connections and short circuits. Installation and maintenance are efficient: No need to disassemble the equipment casing. During later maintenance, it can be operated directly from the outside of the panel, significantly improving maintenance efficiency. It is suitable for control cabinets, distribution boxes and other equipment that are not convenient to disassemble the casing. Connection is stable and anti-interference: The terminals are welded on the PCB board to form a stable connection. Combined with the anti-vibration spring design of the casing, it can withstand the vibration during equipment operation and avoid terminal displacement or loosening. The majority of products have an IP67 protection level. Combined with oil-resistant and UV-resistant materials, it can cope with harsh environments in industrial settings such as dust, oil stains, and humidity. After being soaked in cutting oil, it is not prone to cracking or swelling. Some metal casing models can also be adapted to coastal high-salt spray environments.