Core Count: 3P, 4P, 5P
Category: Male
Direction:180°
Applications: Power, Signal
All-metal direct assembly wire-welding type:
Structural characteristics: The enclosure is made of brass-plated nickel material, covering the entire area from the locking nut to the cable interface, without any plastic splicing components; Durability and compatibility: The all-metal structure passes a salt spray test for over 48 hours without corrosion. In environments with strong corrosivity such as petrochemical and marine industries, its service life is more than three times longer than that of plastic enclosures. It is widely used in metallurgical mining heavy equipment, chemical machinery bus systems, food and pharmaceutical cleaning workshop equipment, AGV trolleys, and petrochemical and marine corrosion environment detection instruments. It can achieve stable signal and power transmission under extreme conditions.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
||
|
A/C
|
D/C
|
AWG
|
mm²
|
|||
| MC12BM-03U2LSLSS101 |
3
|
4A
|
250V
|
250V
|
22
|
0.34
|
| MC12BM-04U2LSLSS101 |
4
|
4A
|
250V
|
250V
|
22
|
0.34
|
| MC12BM-05U2LSLSS101 |
5
|
4A
|
60V
|
60V
|
22
|
0.34
|
| Core | 2A | 3A | 4A | 5A |
| male end |
|
|
|
 |
| 6A | 8A | 12A | 17A | |
|
|
|
|
|
|
| 4B | 5B | 3C | 4C | |
|
|
|
|
|
|
| 5C | 6C | 4D | ||
|
|
|
|
||
| Core | 2A | 3A | 4A | 5A |
| female connector |
|
|
|
|
| 6A | 8A | 12A | 17A | |
|
|
|
|
|
|
| 4B | 5B | 3C | 4C | |
|
|
|
|
|
|
| 5C | 6C | 4D | ||
|
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
M12 A Coded Connection Cable Straight Overmolded Type 2-17PIN Female Solder Type
M16 Circular Connector Rear-Panel Mount 2–24 PIN Male Soldered Type
M12 A Coded Connectors Board Front Mount 2-17PIN Female Solder Type M12*1.0
M12 A Coded Connectors Board Front Mount 2-17PIN Male Solder Type M12*1
telephone
Contact US