Core Count: 3P, 4P, 5P
Category: Male
Installation Method: Panel-type
Direction: 90°
Applications: Power, Signal
Install wide-body plug-in connector behind the panel:
Wide-body structure enhances compatibility and stability: Compared to the conventional narrow-body model, the wide-body design increases the contact area with the installation panel and is equipped with multiple sets of fixed holes, which can reduce the risk of loosening caused by industrial equipment vibration. At the same time, the wide-body housing can accommodate thicker wires or multi-strand cables, suitable for various wire cross-sections ranging from 0.34 to 0.75 mm², providing wider compatibility and also optimizing heat dissipation, preventing performance degradation due to heat accumulation during long-term operation. B-code anti-misinsertion + high protection guarantee: In accordance with IEC 61076 - 2 - 101 standard, the unique key slot design of B-code can prevent incorrect insertion with other encoding connectors such as A or D, and most are 4-5 pole configurations, perfectly meeting the signal transmission requirements of Profibus bus. Most products have a protection level of IP67, capable of withstanding dust and short-term immersion in industrial environments. Some products, when paired with dedicated seals, can further enhance the protection effect.
|
Product model
|
Core
|
Rated current
|
Rated voltage
|
Wire gauge / Dimension
|
||
|
A/C
|
D/C
|
AWG
|
mm²
|
|||
| MC12BM-03R2LDLSR201 |
3
|
4A
|
250V
|
250V
|
22
|
0.34
|
| MC12BM-04R2LDLSR201 |
4
|
4A
|
250V
|
250V
|
22
|
0.34
|
| MC12BM-05R2LDLSR201 |
5
|
4A
|
60V
|
60V
|
22
|
0.34
|
| Core | 2A | 3A | 4A | 5A |
| male end |
|
|
|
 |
| 6A | 8A | 12A | 17A | |
|
|
|
|
|
|
| 4B | 5B | 3C | 4C | |
|
|
|
|
|
|
| 5C | 6C | 4D | ||
|
|
|
|
||
| Core | 2A | 3A | 4A | 5A |
| female connector |
|
|
|
|
| 6A | 8A | 12A | 17A | |
|
|
|
|
|
|
| 4B | 5B | 3C | 4C | |
|
|
|
|
|
|
| 5C | 6C | 4D | ||
|
|
|
|
|
The connector must not be plugged or unplugged under load. Failure to follow the instructions and improper use can result in personal injury.
The development of the connector is aimed at being applied in factory engineering, control and electrical equipment construction. Users are responsible for checking whether the connector can also be used in other applications.
Connectors used in circuits with dangerous voltages that cause electric shock must be installed and used only by personnel who have received training in electrical engineering, or under their supervision, while taking into account the applicable regulations and standards.
Users must take appropriate security measures to ensure that the connectors do not accidentally disconnect.
When installing, apply moderate force and use the special tool to tighten the nuts. Avoid excessive force to prevent the shell from deforming or the pins from bending. Ensure that the plug and socket are fully engaged. Do not power on the device when not locked in place to prevent arc discharge due to poor contact.
The plug connectors with an enclosure protection rating of IP67 and IP68 are not suitable for use in water. When used outdoors, the plug connectors must be protected against corrosion separately. For further information on IP protection ratings, please refer to "Technical Information".
M12 A Coded Connection Cable Straight Overmolded Type 2-17PIN Female Solder Type
M16 Circular Connector Rear-Panel Mount 2–24 PIN Male Soldered Type
M12 A Coded Connectors Board Front Mount 2-17PIN Female Solder Type M12*1.0
M12 A Coded Connectors Board Front Mount 2-17PIN Male Solder Type M12*1
telephone
Contact US