Wire Gauge: Match cable cross-section (0.5–2.5mm²) to current requirements
Shielding: Use shielded cables to prevent EMI interference in industrial environments
Original Clamps: Use factory-supplied cable clamps/tail clamps
Cable Protection: Ensure no bending or pulling stress on the cable
Crimping: Follow specifications with dedicated crimping tools
Welding: Ensure full tin plating with no cold solder joints
Fixing Distance: Secure cables ≥15cm from the connector
Stress Avoidance: Prevent direct force on the connector interface
Preventive Note: For cables in high-flex applications (e.g., robotic arms), use flex-rated cables and check strain relief components quarterly to prevent premature failure from fatigue.
telephone
Contact US